How to configure an Ethernet connection between iPad and RaspberryPi through USB-C

submited by

Style Pass

2024-10-26 15:30:06

I recently found out that not only you can power a RaspberryPi device through the USB-C of an iPad but that you can also get an ethernet connection through it

Connect the RaspberryPi to the iPad using the USB-C cable and wait for it to boot. Once it finishes booting up, open Settings on the iPad and check if there is an Ethernet section below the WiFi Connection. If you find the entry, then it means the connection is successful.

This tutorial has been written thanks to this other tutorial https://github.com/verxion/RaspberryPi/blob/main/Pi5-ethernet-and-power-over-usbc.md