In this 555 project, I have explained how to make an automatic water level controller for submersible pump using the 555 timer IC. This water pump con

Automatic Water Level Controller for Submersible Pump circuit

submited by

Style Pass

2021-05-28 11:30:40

In this 555 project, I have explained how to make an automatic water level controller for submersible pump using the 555 timer IC. This water pump controller will also check the water level in the underground tank and automatically ON and OFF the pump according to the water level in the overhead tank.

The pump will automatically turn on if the water level in the overhead tank decrease (below the green wire). And the Pump will stop when the water level in the overhead tank touches the red wire.

Now, if the water level in the underground tank comes below UL1 level, the pump will automatically stop although the overhead tank water level is low.

In this article, I have explained all the steps to make the homemade PCB for the motion sensor light circuit. To make the PCB I have used an acrylic sheet.

You can order any custom design PCB from PCBWay at a very affordable price. At PCBWay, all the boards pass through the most stringent tests other than the basic visual check. They use different testing and inspecting equipment, such as Flying Probe Tester, X-Ray Inspection Machine, Automated Optical Inspection (AOI) Machine, etc to make sure the quality of the final product is good.