Who-T: libwacom and Huion/Gaomon devices

submited by

Style Pass

2024-05-09 06:30:04

libwacom, now almost 13 years old, is a C library that provides a bunch of static information about graphics tablets that is not otherwise available by looking at the kernel device. Basically, it's a set of APIs in the form of libwacom_get_num_buttons and so on. This is used by various components to be more precise about initializing devices, even though libwacom itself has no effect on whether the device works. It's only a library for historical reasons [2], if I were to rewrite it today, I'd probably ship libwacom as a set of static json or XML files with a specific schema.

Here are a few examples on how this information is used: libinput uses libwacom to query information about tablet tools.The kernel event node always supports tilt but the individual tool that is currently in proximity may not. libinput can get the tool ID from the kernel, query libwacom and then initialize the tool struct correctly so the compositor and Wayland clients will get the right information. GNOME Settings uses libwacom's information to e.g. detect if a tablet is built-in or an external display (to show you the "Map to Monitor" button or not, if builtin), GNOME's mutter uses the SVGs provided by libwacom to show you an OSD where you can assign keystrokes to the buttons. All these features require that the tablet is supported by libwacom.

Huion and Gamon devices [3] were not well supported by libwacom because they re-use USB ids, i.e. different tablets from seemingly different manufacturers have the same vendor and product ID. This is understandable, the 16-bit product id only allows for 65535 different devices and if you're a company that thinks about more than just the current quarterly earnings you realise that if you release a few devices every year (let's say 5-7), you may run out of product IDs in about 10000 years. Need to think ahead! So between the 140 Huion and Gaomon devices we now have in libwacom I only counted 4 different USB ids. Nine years ago we added name matching too to work around this (i.e. the vid/pid/name combo must match) but, lo and behold, we may run out of unique strings before the heat death of the universe so device names are re-used too! [4] Since we had no other information available to userspace this meant that if you plugged in e.g. a Gaomon M106 and it was detected as S620 and given wrong button numbers, a wrong SVG, etc.